Wednesday 02.1.2008
Strenght day
A1 Good mornings
1x3 187
7x3 198
Dunno if I'm happy about this; it's the first time I've ever done GMs this heavy. I usually use a pretty narrow grip here, but today I tried a wider one and it was actually easier.. so I'll be going with that from now on.
B1 PL bench press
By "PL" I mean simulating a PL comp, where you have to keep the bar on your chest for a moment before benching up, so no touch and go.
2x3 187
5x3 181.5
1x2 181.5
Either by bench press hasn't improved a lot, or doing that pause at the bottom really lowers the ammount you can lift. I've kinda never tried this before, so I don't know.
C1 Elbows flared bent over BB row
1x8 88
3x8 110
1xX 110 (I lost count, and just continued until I was fatigued)
For some reason I've heard people frown upon elbows flared (when I say elbows flared I don't necessarily mean elbows stictly straight out from the body, but almost, I pull to my chest) row variations and everyone seems to be recommending pulling the bar to the middle or lower abs. I kinda think this is pull and think I have developed an imbalance with not doing enough elbows flared stuff. When you pull low you'll use more lats, and I can now pull way more if I pull low than I can if I pull high. I never feel it in between my shoulderblades except when I do elbows flared stuff, I'll be doing more of this now to correct this imbalance.
D1 Bulgarian squat
2x10 26.4
Dang these were hard, my quads were burning like crazy. I was expecting to do a lot more weight here, but I haven't trained these in ages so I guess I'm not conditioned towards that exercise anymore. My quad endurance suck, I start noticing the lactate acid almost instantly, this is really weird as it's just my quads...
E1 Knee ab rollout
1x6 22
1x5 22 (crappy ROM)
1x4 22 (good ROM)
22 lbs on an EZ curl bar, the more weight, the harder it is to roll back, trust me
E2 L lat raise with ext rotation
1x8 17.6
2x7 15.4
PWO: The usual
Videos of one of the GM and Bench sets will follow
Strenght day
A1 Good mornings
1x3 187
7x3 198
Dunno if I'm happy about this; it's the first time I've ever done GMs this heavy. I usually use a pretty narrow grip here, but today I tried a wider one and it was actually easier.. so I'll be going with that from now on.
B1 PL bench press
By "PL" I mean simulating a PL comp, where you have to keep the bar on your chest for a moment before benching up, so no touch and go.
2x3 187
5x3 181.5
1x2 181.5
Either by bench press hasn't improved a lot, or doing that pause at the bottom really lowers the ammount you can lift. I've kinda never tried this before, so I don't know.
C1 Elbows flared bent over BB row
1x8 88
3x8 110
1xX 110 (I lost count, and just continued until I was fatigued)
For some reason I've heard people frown upon elbows flared (when I say elbows flared I don't necessarily mean elbows stictly straight out from the body, but almost, I pull to my chest) row variations and everyone seems to be recommending pulling the bar to the middle or lower abs. I kinda think this is pull and think I have developed an imbalance with not doing enough elbows flared stuff. When you pull low you'll use more lats, and I can now pull way more if I pull low than I can if I pull high. I never feel it in between my shoulderblades except when I do elbows flared stuff, I'll be doing more of this now to correct this imbalance.
D1 Bulgarian squat
2x10 26.4
Dang these were hard, my quads were burning like crazy. I was expecting to do a lot more weight here, but I haven't trained these in ages so I guess I'm not conditioned towards that exercise anymore. My quad endurance suck, I start noticing the lactate acid almost instantly, this is really weird as it's just my quads...
E1 Knee ab rollout
1x6 22
1x5 22 (crappy ROM)
1x4 22 (good ROM)
22 lbs on an EZ curl bar, the more weight, the harder it is to roll back, trust me
E2 L lat raise with ext rotation
1x8 17.6
2x7 15.4
PWO: The usual
Videos of one of the GM and Bench sets will follow
Last edited: